LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 617 (Engine Control System (DTC/Circuit Diagnosis) (1 Of 17)) >> DTC/Circuit Diagnosis >> DTC P0010: Intake Valve Timing Control >> DTC Description >> Fail-Safe

DTC Description: Fail-Safe

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Fail safe mode

Vehicle behavior

Device fix mode
  • Fixes electric intake valve timing control motor in the reference position.
  • Fixes exhaust valve timing control solenoid valve in the reference position.

Combustion control mode

Stratified charge combustion control at starting

No stratified charge combustion at starting (cold start).

Idle speed control*

Stops feedback control of idle speed and controls with specified speed.

Recovery speed control at decelerating*

Stops recovery speed control by the fuel cut at decelerating and controls with specified speed.

Others

ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)

*: This control may not be executed.

scientia non olet · About LEMON Manuals