Component Inspection (High Pressure Fuel Pump Relay)
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK HIGH PRESSURE FUEL PUMP RELAY
- Turn ignition switch OFF.
- Remove high pressure fuel pump relay.
- Check the continuity between high pressure fuel pump relay terminals as per the following conditions.
High pressure fuel pump relay
Condition
Continuity
Terminal
12 V direct current supply between terminals
and
Existed
No current supply
Not existed
Is the inspection result normal?
YES
INSPECTION END
NO
Replace high pressure fuel pump relay.