Dowel Pin Alignment: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Use suitable tool to lock the drive plate and match mark (A) before removing the bolts.

Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION: Do not damage the ring gear teeth or the signal plate teeth behind the ring gear.
Remove drive plate.

Courtesy of NISSAN NORTH AMERICA, INC.
- Loosen the drive plate in a diagonal order.
CAUTION:
- Do not place drive plate with signal plate facing down.
- When handling the signal plate, take care not to damage or scratch it.
- Handle the signal plate in a manner that prevents it from becoming magnetized.