LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 615 (Engine Mechanical) >> Removal And Installation >> Ignition Coil >> Removal and Installation (Bank 2) >> Removal

Removal and Installation (Bank 2): Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine room cover. Refer to Removal and Installation .
  2. Disconnect the harness connector from ignition coil.
  3. Remove the ignition coil.
    CAUTION: Do not shock ignition coil.
scientia non olet · About LEMON Manuals