Removal and Installation: Notes
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Situate the vehicle on a flat and solid surface.
- Place chocks at front and back of rear wheels.
CAUTION:
- Always work safely.
- Do not start work until the engine and exhaust system are cooled completely.
- Refer to the applicable articles for warnings, cautions, notes, and instructions if necessary procedures are not included in this article.
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.