Camshaft Sprocket Runout
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- Put V-block on precise flat bed and support No. 2 and No. 4 journal of camshaft as shown, below.
 Courtesy of NISSAN NORTH AMERICA, INC.
|
- Install camshaft sprocket on camshaft.
- Measure camshaft sprocket runout.
|
Runout
|
: Less than 0.15 mm (0.0059 in)
|
- If sprocket runout exceeds the limit, replace camshaft sprocket.