LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 615 (Engine Mechanical) >> Periodic Maintenance >> Drive Belt >> Removal and Installation of Drive Belt Auto-tensioner >> Removal

Removal and Installation of Drive Belt Auto-tensioner: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • The complete drive belt auto-tensioner must be replaced as a unit, including the pulley.
  • Do not loosen the drive belt auto-tensioner pulley bolt. (Do not turn it counterclockwise. If turned counterclockwise, the complete drive belt auto-tensioner must be replaced as a unit, including pulley).
  1. Remove the drive belt. Refer to Removal and Installation .
  2. Remove the drive belt auto-tensioner.
scientia non olet · About LEMON Manuals