Component Inspection
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK INTAKE SENSOR
- Turn ignition switch OFF.
- Disconnect intake sensor connector.
- Check resistance between intake sensor terminals.
Terminal
Condition
Resistance: kOhm
Temperature: deg.C (deg.F)
1
2
-15 (5)
17.73
-10 (14)
13.46
-5 (23)
10.33
0 (32)
8.00
5 (41)
6.25
10 (50)
4.93
15 (59)
3.92
20 (68)
3.14
25 (77)
2.54
30 (86)
2.06
35 (95)
1.69
40 (104)
1.39
45 (113)
1.15
Is the inspection result normal?
YES
Inspection End.
NO
Replace intake sensor. Refer to Removal and Installation .