Component Inspection
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK IN-VEHICLE SENSOR
- Turn ignition switch OFF.
- Disconnect in-vehicle sensor connector.
- Check resistance between in-vehicle sensor terminals.
Terminal
Condition
Resistance: kOhm
Temperature: deg.C (deg.F)
1
2
-15 (5)
12.73
-10 (14)
9.92
-5 (23)
7.80
0 (32)
6.19
5 (41)
4.95
10 (50)
3.99
15 (59)
3.24
20 (68)
2.65
25 (77)
2.19
30 (86)
1.81
35 (95)
1.51
40 (104)
1.27
45 (113)
1.07
Is the inspection result normal?
YES
Inspection End.
NO
Replace in-vehicle sensor. Refer to Removal and Installation .