Engine Output Characteristics After Switching Mode

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Engine output characteristics after switching mode by operating the drive mode select switch are as follows.
- After switching mode to a mode that engine output increase, engine output characteristics are changed by releasing the accelerator pedal.
- After switching mode to a mode that engine output decreases, engine output characteristics are changed immediately.
When an accelerator angle is constant, engine output characteristics are as follows.
- SPORT = STANDARD > ECO > SNOW

Output characteristics of each mode

Control mode	Engine output
SPORT	Normal ^*
STANDARD	Normal
ECO	Decrease
SNOW	Decrease (More reduction than ECO mode)

*: Not controlled by engine control system.