LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 610 (Heater & Air Conditioning System) >> Removal And Installation >> Expansion Valve >> Removal and Installation - Rear Expansion Valve >> Removal

Removal and Installation - Rear Expansion Valve: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Discharge the refrigerant. Refer to Recycle Refrigerant .
  2. Remove the luggage side lower finisher (RH). Refer to Removal and Installation .
  3. Disconnect the rear underfloor high-pressure and low-pressure pipes from the rear cooling unit assembly.
  4. Remove the rear expansion valve bolts, then remove the rear expansion valve.
    CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
scientia non olet · About LEMON Manuals