Oil Adjusting Procedure for Components Replacement Except Co
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
Fill with oil for the amount that is calculated according to the following conditions.
Example: Oil amount to be added when replacing evaporator [m
(US fl oz, Imp fl oz)] = 75 (2.5, 2.6) + ±
|
Conditions |
Oil amount to be added to A/C system m |
|
|
Replace evaporator |
75 (2.5, 2.6) |
|
|
Replace condenser (includes liquid tank) |
80 (2.7, 2.8) |
|
|
Refrigerant leakage is detected |
Large amount leakage |
30 (1.0, 1.1) |
|
Small amount leakage |
-- |
|
|
Oil amount that is recycled together with refrigerant during recycle operation |
± |
|