Removal and Installation: Removal
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.
CVT fluid cooler hoses
- Drain engine coolant from radiator. Refer to Changing Engine Coolant .
- Remove front air duct. Refer to Exploded View .
- Remove hose clamps, and remove CVT fluid cooler hose A.
- Remove hose clamps, and remove CVT fluid cooler hose B.
- Remove CVT fluid cooler tube A and CVT fluid cooler tube B.
CVT fluid cooler
- Drain engine coolant from radiator. Refer to Changing Engine Coolant .
- Remove front wheel and tire (LH). Refer to Adjustment .
- Remove fender protector side cover (LH). Refer to Exploded View .
- Loosen front of fender protector (LH). Refer to Exploded View .
- Remove cooler hose (upper) and cooler hose (lower) from CVT fluid cooler.
- Remove nuts from oil cooler bracket and bolts from oil cooler bracket.
- Remove CVT fluid cooler from vehicle.
- Remove air guide if necessary.