CVT Fluid: Inspection

FLUID LEAKAGE 

• Check transaxle surrounding area (oil seal and plug etc.) for fluid leakage.

• If transaxle appears to have oil seepage or a leak, follow the steps below to assist in a correct diagnosis.

  Courtesy of NISSAN NORTH AMERICA, INC.

1. Thoroughly clean off the area of the suspected leak.
2. Insert 1 fluid ounce of Fluorescent Oil Dye into CVT.

   Tool number

   : -- (J-28431)

3. Drive vehicle for a minimum of 10 minutes.
4. Inspect for leaks with A/C Dye Kit.

   Tool number

   : -- (J-43926)

   NOTE:

   • Corrosion protection chemicals or assembly lubricants may cause dust to accumulate (gather) on the transaxle and have the appearance of an oil leak. Neither of these requires corrective action.
   • If no fluorescent oil trace/leak is found, no action is necessary.
   • If fluorescent oil trace/leak is found repair or replace damaged parts and adjust CVT fluid level. Refer to Adjustment .