Work Support

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Work item	Description	Refer to
TEMP SET CORRECT	Setting change of temperature setting trimmer (front) can be performed.	Temperature Setting Trimmer (Front)
REC MEMORY SET	Setting change of inlet port memory function (REC) can be performed.	Inlet Port Memory Function (REC)
FRE MEMORY SET	Setting change of inlet port memory function (FRE) can be performed.	Inlet Port Memory Function (FRE)
BLOW SET	Setting change of foot position setting trimmer can be performed.	Foot Position Setting Trimmer
GAS SENSOR ADJUSTMENT ^*	Setting change of exhaust gas / outside odor detecting sensor sensitivity adjustment function can be performed.	Exhaust Gas / Outside Odor Detecting Sensor Sensitivity Adjustment Function
CLEAN SW SET ^*	Setting change of auto intake switch interlocking movement change function can be performed.	Auto Intake Switch Interlocking Movement Change Function
REAR TEMP SET CORRECT	Setting change of temperature setting trimmer (rear) can be performed.	Temperature Setting Trimmer (Rear)

*: With ACCS (advanced climate control system)

NOTE: When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of WORK SUPPORT may be cancelled.