Moonroof Unit Assembly: Inspection: Weatherstrip

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Visually check weatherstrip for damage, deterioration, or deformation.
- Open glass lid partially to inspect front edge of weatherstrip.
- Tilt up glass lid fully to inspect sides and rear edge of weatherstrip.
If any area of the weatherstrip is found to be damaged, replace the glass lid. Refer to Removal and Installation .
Check for leaks around glass lid.
- Close glass lid.
- Pour water around surface to determine area of concern.
  - For gaps or misalignment, adjust glass lid to specifications. Refer to ADJUSTMENT in this information.
  - For damaged sealing surfaces, either replace glass lid, refer to Removal and Installation or repair the panel.