Anti-Pinch Function
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
Moonroof
- Fully open the moonroof to the full open position.
- Place a piece of wood at the fully closed position.
- Close the moonroof completely with auto-slide close function.
- Moonroof should make contact and then tilt up or travel in reverse for 200mm (7.87 in.).
CAUTION:
- Do not test the anti-pinch function with your hands or other body parts because they may be pinched.
- Depending on the environment and driving conditions, if a similar impact or load is applied to the moonroof it may lower.
- Test the auto-slide operation before inspection when the initialization procedure is performed.
- Perform the initialization procedure when the auto-slide operation or anti-pinch function does not operate normally.