LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (Door & Lock) >> Removal And Installation >> Hood Lock >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION:
  • Be careful not to bend cable too much, keeping the radius 100 mm (3.94 in) or more.
  • Check that hood lock release cable and secondary latch cable are properly engaged with hood lock assembly.
  • After installation, perform hood assembly adjustment procedure. Refer to Adjustment .
  • After adjusting, perform hood lock inspection. Refer to Inspection .
scientia non olet · About LEMON Manuals