LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (Door & Lock) >> Removal And Installation >> Front Fender >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front fender protector. Refer to Removal and Installation .
  2. Remove front combination lamp. Refer to Removal and Installation .
  3. Release the clips and pawls using a suitable tool and remove hood ledge finisher.
  4. Remove front fender outside lower molding. Refer to Removal and Installation .
  5. Remove front fender bolts and front fender.
    CAUTION: Use care when removing the front fender. The front fender baffle foam adheres the front fender to the body side outer. Carefully release the baffle foam or damage to the front fender may occur.
scientia non olet · About LEMON Manuals