Physical Values
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
|
Terminal No. (Wire color) |
Description |
Condition |
Voltage (Approx.) |
|||
|
(+) |
(-) |
Signal name |
Input/Output |
|||
|
1 (L) |
Ground |
Serial communication |
Input/Output |
-- |
-- |
|
|
2 (GR) |
Ground |
Power supply (BAT) |
Input |
-- |
Battery voltage |
|
|
3 (B) |
Ground |
Ground |
-- |
-- |
0 V |
|
|
4 (W) |
Ground |
Motion activated back door sensor (upper) input signal |
Input |
-- |
-- |
|
|
5 (W) |
Ground |
Motion activated back door sensor (upper) output signal |
Input |
-- |
-- |
|
|
6 (B) |
Ground |
Motion activated back door sensor (lower) input signal |
Input |
-- |
-- |
|
|
7 (B) |
Ground |
Motion activated back door sensor (lower) output signal |
Input |
-- |
-- |
|
NOTE:
Voltage generated in communication circuit between motion activated back door sensor and motion activated back door control unit is extremely low and therefore cannot be measured.