LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (Door & Lock) >> Ecu Diagnosis Information >> Automatic Back Door Control Unit >> Fail Safe

Fail Safe

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Display contents of CONSULT

Fail-safe

Cancellation

U1000 CAN COMM

Inhibit automatic back door operation

Return to normal status.

U1010 CONTROL UNIT (CAN)

Inhibit automatic back door operation

Return to normal status.

U1321 ABD: NOT CONFIGURED

Inhibit automatic back door operation

Return to normal status.

U1322 ABD: CONFIGURATION

Inhibit automatic back door operation

Return to normal status.

U1325 CALIBRATION

Inhibit automatic back door operation

Return to normal status.

B2401 IGN OPEN

Inhibit automatic back door operation

Automatic back door control module detects ignition switch ON signal via CAN communication.

B2409 HALF LATCH SW

Inhibit automatic back door operation

Automatic back door control module detects that half latch switch changes from ON to OFF when back door fully closes.

B2416 TOUCH SEN R OPEN

Inhibit automatic back door operation

Return to normal status.

B2417 TOUCH SEN L OPEN

Inhibit automatic back door operation

Return to normal status.

B2419 OPEN SW

Inhibit automatic back door operation

Reconnect battery.

B2420 CLOSE SW

Inhibit automatic back door operation

Reconnect battery.

B2422 BACK DOOR STATE

Inhibit automatic back door operation

Half latch switch is ON from OFF.

B2423 ABD MTR TIME OUT

Inhibit automatic back door operation

At least 180 seconds are passed after automatic back door operation is inhibited.

B2426 SPINDLE SENSOR LH

Inhibit automatic back door operation

Return to normal status.

B2427 SPINDLE SENSOR RH

Inhibit automatic back door operation

Return to normal status.

B2428 AUTO BACK DR CNT MODULE

Inhibit automatic back door operation

Return to normal status.

B242A CLSR CONDITION

Inhibit automatic back door operation

Reconnect battery.

B242B KICK SENSOR POWER SUPPLY FAILURE

Inhibit hands free operation

Return to normal status.

B242C KICK SENSOR CONTROL UNIT

Inhibit hands free operation

Return to normal status.

B242D KICK SENSOR 1

Inhibit hands free operation

Return to normal status.

B242E KICK SENSOR 2

Inhibit hands free operation

Return to normal status.

B242F ABD BUZZER

Inhibit automatic back door operation

Return to normal status.