Work Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1
Fully close the back door manually.

GO TO 2.
STEP 2
1. Select "AUTO BACK DOOR " using CONSULT.
2. Select "RESET AUTO BACK DOOR STATUS" of "WORK SUPPORT" mode.
3. Touch "START" to erase automatic back door position information.
GO TO 3.
STEP 3
Operate back door opener switch and perform automatic open operation.

NOTE: At this time, automatic operation of back door is performed at half speed.

GO TO 4.
STEP 4
1. The back door fully opens.
2. Check that automatic back door warning buzzer sounds normally.
Does automatic back door warning buzzer sound normally?

YES

GO TO 5.

NO

GO TO 1.
STEP 5
Fully close the back door.

Inspection End.