LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 600 (Steering System) >> Removal And Installation >> Steering Gear And Linkage >> Removal and Installation - Boot >> Removal

Removal and Installation - Boot: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove outer socket. Refer to Removal and Installation - Outer socket .
  2. Remove inner socket lock nut.
  3. Remove the nuts and separate the stabilizer connecting rods from the stabilizer bar. Reposition the stabilizer bar. Refer to Removal and Installation .
  4. Remove small boot clamp and large boot clamp.
    CAUTION: Do not reuse large boot clamp.
  5. Remove boot.
scientia non olet · About LEMON Manuals