Neutral Position On Steering Wheel
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- Check neutral position on steering wheel after confirming that front wheel alignment is correct. Refer to Inspection and Adjustment .
- Turn tires straight ahead, check if steering wheel is in the neutral position.
- If it is not in the neutral position, remove steering wheel and reinstall it correctly.
- If the neutral position cannot be attained by repositioning the steering wheel two teeth or less on steering stem, loosen tie-rod lock nuts of power steering gear outer sockets, then adjust tie-rods by the same amount in the opposite direction.