Removal and Installation: Removal
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Drain washer fluid.
- Using a suitable tool, remove clip (A) from the radiator core support and remove the washer tank inlet (1) from the washer tank.
- Remove front under cover. Refer to Removal and Installation .
- Remove fender protector (RH). Refer to Removal and Installation .
- Disconnect harness connectors from front washer motor and washer fluid level switch.
- Disconnect front washer tube from front washer motor.
- Remove washer tank bolts, then remove washer tank.