LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Exterior Trim) >> Removal And Installation >> Roof Side Molding >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Starting at the rear, lift and pull the roof side molding upward.
  2. Release the roof side molding from the channel and remove from the roof.
scientia non olet · About LEMON Manuals