LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Exterior Trim) >> Removal And Installation >> Roof Side Molding >> Clip Replacement >> Removal

Clip Replacement: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove roof side molding.
  2. Heat adhesive tape interface using suitable tool (heat gun), then peel roof side molding clips (body side) using long-nose pliers.
    CAUTION: Be careful not to damage the body.
scientia non olet · About LEMON Manuals