Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Remove the trunk lid finisher. Refer to Removal and Installation .
Disconnect the trunk request switch harness connector (A) and disengage grommet (B) from trunk lid (1).

Courtesy of NISSAN NORTH AMERICA, INC.
Remove the license lamp finisher nuts (A) and bolts (B).

Courtesy of NISSAN NORTH AMERICA, INC.
Disengage clips and then remove license lamp finisher.