Method Of Starting
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch to the ON position.
- Turn ON headrest display unit.
- Press "SETUP" switch
of remote controller.
 Courtesy of NISSAN NORTH AMERICA, INC.
|
- With the "ENTER" switch
, select "Information" displayed on the headrest display unit screen.
- Press switches in the order of
,
, 
,
, 
, 
,
,
,
to start Diag/Version Infor.