Fail-Safe Conditions
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
When the following condition is satisfied, the video distributor enters Fail-safe mode.
- The temperature of the video distributor is 75 deg.C (167 deg.F) or more for 60 consecutive seconds.
- Battery voltage of the video distributor is 17 V or more for 15 consecutive seconds.
- Battery voltage of the video distributor is 8 V or less for 15 consecutive seconds.
Display
When entering the Fail-safe mode, the video distributor displays a message on the display for 7 seconds and turns OFF the output of video and audio.
|
Fail-safe condition |
Display (display of the fail-safe condition) |
|
When video distributor temperature is high |
Abnormal Player Temperature Abnormal temperature is detected by this Player.Shutting down this device in 7 seconds. |
|
When video distributor voltage is high |
Abnormal Player voltage Abnormal voltage is detected by this Player.Shutting down this device in 7 seconds. |
|
When video distributor voltage is low |
Abnormal Player voltage Abnormal voltage is detected by this Player.Shutting down this device in 7 seconds. |