Diagnosis Procedure
- CHECK FUSES
Check for blown fuses.
Power source
Fuse No.
Capacity
Battery
15
15 A
ACC
65
10 A
Are the fuses blown?
YES
Replace the blown fuse after repairing the affected circuit.
NO
GO TO 2.
- CHECK VIDEO DISTRIBUTOR POWER SUPPLY CIRCUIT
Check voltage between video distributor connector and ground.
Probe
Reference value
(Approx.)
+
-
Video distributor
Connector
Terminal
M156
1
Ground
Battery voltage
21
Is the inspection result normal?
YES
GO TO 3.
NO
Repair video distributor power supply circuit.
- CHECK VIDEO DISTRIBUTOR ACC POWER SUPPLY CIRCUIT
- Turn ignition switch ACC.
- Check voltage between video distributor connector and ground.
Probe
Reference value
(Approx.)
+
-
Video distributor
Connector
Terminal
M156
22
Ground
Battery voltage
Is the inspection result normal?
YES
GO TO 4.
NO
Repair video distributor ACC power supply circuit.
- CHECK VIDEO DISTRIBUTOR GROUND CIRCUIT
- Turn ignition switch OFF.
- Disconnect video distributor connector M156.
- Check the continuity between video distributor connector and ground.
Video distributor
Ground
Continuity
Connector
Terminal
M156
3
Yes
23
28
Is the inspection result normal?
YES
Inspection End.
NO
Repair video distributor ground circuit.