LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 596 (Around View Monitor System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U1305: CONFIG UNFINISH >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM CONFIGURATION OF AROUND VIEW MONITOR CONTROL UNIT 

    Perform configuration of around view monitor control unit. Refer to Work Procedure .

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE AGAIN 

    SYMBOL CONSULT

    1. Turn ignition switch ON.
    2. Erase DTC.
    3. Select "Self Diagnostic Result" mode of "AVM".
    4. Check DTC.

    Is DTC U1305 detected?

    YES

    Replace around view monitor control unit. Refer to Removal and Installation .

    NO

    Inspection End.