LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 596 (Around View Monitor System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U0428: Steering Angle Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 

    If DTC U0428 is displayed with DTC U1232, first perform the diagnosis for DTC U1232.

    Is DTC U1232 detected?

    YES

    Proceed to DTC Description .

    NO

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 

    SYMBOL CONSULT

    1. Turn ignition switch ON.
    2. Select "Self Diagnostic Result" mode of "AVM" using.
    3. Check DTC.

    Is DTC U0428 detected?

    YES

    Proceed to Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Intermittent Incident .

    NO

    Confirmation after repair: Inspection End.

scientia non olet · About LEMON Manuals