Diagnosis Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM SONAR CONTROL UNIT CONFIGURATION PROCEDURE
CONSULT
Perform the sonar control unit configuration procedure. Refer to Work Procedure .
Was the configuration procedure successful?
YES
GO TO 2.
NO
Replace sonar control unit. Refer to Removal and Installation .
- DTC CONFIRMATION PROCEDURE
CONSULT
- Turn ignition switch ON.
- Erase DTCs.
- Perform "Self Diagnostic Result" mode of "SONAR".
Is DTC B2724 detected?
YES
Replace sonar control unit. Refer to Removal and Installation .
NO
Inspection End.