Telematics System (DTC/Circuit Diagnosis)
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK USB HARNESS CONNECTION
- Turn ignition switch OFF.
- Visually check the USB harness connection between display control unit and TCU.
Is the inspection result normal?
YES
GO TO 2.
NO
Repair or replace USB harness.
- PERFORM DTC CONFIRMATION PROCEDURE AGAIN
With CONSULT
- Turn ignition switch ON.
- Erase DTC using CONSULT.
- Select "Self Diagnostic Result" mode of "TELEMATICS" using CONSULT.
- Check DTC.
Is DTC B13D9 detected?
YES
Replace TCU. Refer to Removal and Installation .
NO
Inspection End.