Meter System: Fail-Safe

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.

Function		Specifications
Speedometer		Reset to zero by suspending communication.
Tachometer
Engine coolant temperature gauge
Illumination control		When suspending communication, changes to nighttime mode.
Information display	Odo/trip meter	An indicated value is maintained at communications blackout.
	Shift position indicator	The display turns OFF by suspending communication.
	Warning messages	The display turns OFF by suspending communication.
Buzzer		The buzzer turns OFF by suspending communication.
Warning lamp/indicator lamp	ABS warning lamp	The lamp turns ON by suspending communication.
	Slip indicator lamp
	Brake warning lamp
	FEB warning lamp (if equipped)
	Malfunction indicator lamp
	VDC OFF indicator lamp
	EPS warning lamp
	Low tire pressure warning lamp	The lamp blinking caused by suspending communication.
	High beam indicator lamp	The lamp turns OFF by suspending communication.
	Turn signal indicator lamp
	Master warning lamp
	Front lamp indicator lamp
	Lane departure warning
	High beam assist indicator lamp (if equipped)
	Tail lamp indicator lamp
	Air bag warning lamp	The lamp turns off when disconnected.
	Charge warning lamp
	Seat belt warning lamp
	Security indicator lamp