Data Monitor

Display item [Unit]

MAIN

SIGNALS

Description

SPEED METER

[mph or km/h]

X

Displays the value of vehicle speed signal.

SPEED OUTPUT

[mph or km/h]

X

Vehicle speed signal value transmitted to other units via CAN communication.

ODO OUTPUT

[mph or km/h]

Odometer signal value transmitted to other units via CAN communication.

TACHO METER

[rpm]

X

Value of the engine speed signal received from ECM via CAN communication.

FUEL METER

[L]

X

Fuel level indicated on combination meter.

W TEMP METER

[ deg.F] or [ deg.C]

X

Displays the value of engine coolant temperature signal, which is input from ECM.

ABS W/L

[On/Off]

Displays [On/Off] condition of ABS warning indicator.

VDC/TCS IND

[On/Off]

Displays [On/Off] condition of VDC OFF indicator lamp.

SLIP IND

[On/Off]

Displays [On/Off] condition of SLIP indicator lamp.

BRAKE W/L

[On/Off]

Displays [On/Off] condition of brake warning indicator.

DOOR W/L

[On/Off]

Displays [On/Off] condition of door warning message.

TRUNK/GLAS-H

[On/Off]

Displays [On/Off] condition of back door open warning message.

HI-BEAM IND

[On/Off]

Displays [On/Off] condition of high beam indicator.

TURN IND

[On/Off]

Displays [On/Off] condition of turn indicator.

FR FOG IND

[On/Off]

Displays [On/Off] condition of front fog lamp indicator.

LIGHT IND

[On/Off]

Displays [On/Off] condition of light indicator.

OIL W/L

[On/Off]

Displays [On/Off] condition of low oil pressure warning message.

MIL

[On/Off]

Displays [On/Off] condition of malfunction indicator.

CRUISE IND

[On/Off]

Displays [On/Off] condition of CRUISE indicator in the information display.

CRUISE W/L

[On/Off]

Displays [On/Off] condition of tire CRUISE warning message.

4WD W/L

[On/Off]

Displays [On/Off] condition of tire AWD warning message.

SET IND

[On/Off]

Displays [On/Off] condition of SET indicator in the information display.

FUEL W/L

[On/Off]

Displays [On/Off] condition of low-fuel warning message.

WASHER W/L

[On/Off]

Displays [On/Off] condition of low washer fluid warning message.

AIR PRES W/L

[On/Off]

Displays [On/Off] condition of tire pressure warning lamp.

KEY G/Y W/L

[On/Off]

Displays [On/Off] condition of key green warning lamp.

EPS W/L

[On/Off]

Displays [On/Off] condition of EPS warning indicator.

ECO MODE IND

[On/Off]

Displays [On/Off] condition of ECO MODE indicator in the information display.

LCD

Displays the value of Intelligent Key system message indication.

ACC TARGET

[On/Off]

Displays [On/Off] condition of the vehicle ahead detection indicator in the information display.

ACC DISTANCE

[Off/Short/Middle/Long]

Displays [Off/Short/Middle/Long] condition of the set distance indicator in the information display.

ACC SET SPEED

[Off, km/h or mph]

Displays Off or SET vehicle speed status in the information display.

ACC UNIT

[On/Off]

Displays [On/Off] condition of display unit in the information display.

SHIFT IND

[P, R, N, D]

Displays shift selector position.

ECO DRIVE IND G

[On/Off]

Displays [On/Off] condition of green ECO DRIVE indicator in the information display.

ECO DRIVE IND O

[On/Off]

Displays [On/Off] condition of orange ECO DRIVE indicator in the information display.

DRIVE MODE STATS

[STANDARD/ECO/SPORT/SNOW]

Displays condition of drive mode switch.

FUEL CAP W/L

[On/Off]

Displays [On/Off] condition of loose fuel cap warning message.

O/D Off SW

[On/Off]

Status of SPORT mode switch.

M RANGE SW

[On/Off]

Displays [On/Off] condition of manual mode switch.

NM RANGE SW

[On/Off]

Displays [On/Off] condition of non-manual mode switch.

AT SFT UP SW

[On/Off]

Displays [On/Off] condition of manual mode shift up switch.

AT SFT DWN SW

[On/Off]

Displays [On/Off] condition of manual mode shift down switch.

ST SFT UP SW

[Not support]

ST SFT DWN SW

[Not support]

PKB SW

[On/Off]

Displays [On/Off] condition of parking brake switch.

BUCKLE SW

[On/Off]

Status of seat belt buckle switch LH.

BRAKE OIL SW

[On/Off]

Displays [On/Off] condition of brake fluid level switch.

PASS BUCKLE SW

[On/Off]

Status of passenger seat belt buckle switch RH.

DISTANCE

[km] or [Mi]

Displays distance to empty.

OUTSIDE TEMP

[ deg.F or deg.C]

Displays the ambient air temperature which is input from the ambient sensor.

FUEL LOW SIG

[On/Off]

Displays [On/Off] condition of low-fuel warning signal.

BUZZER

[On/Off]

X

Buzzer status (in the combination meter) is detected from the buzzer output signal received from each unit via CAN communication and the warning output condition of the combination meter.

TPMS FLT TIRE

[On/Off]

Status of flat tire detected from tire pressure data signal is received from BCM via CAN communication.

TPMS PRESS L

[On/Off]

Displays [On/Off] condition of low tire pressure message in the information display.

TPMS MALF

[On/Off]

Displays [On/Off] condition of TPMS warning indicator.

4WD CL TMP H

[On/Off]

Displays [On/Off] condition of AWD clutch high temperature message in the information display.

4WD TIRE CHCK

[On/Off]

Displays [On/Off] condition of AWD tire check message in the information display.

4WD SYS MALF

[On/Off]

Displays [On/Off] condition of AWD system malfunction message in the information display.

BATTERY CIRCUIT STATUS

[NORMAL/OPEN]

Status of fuse for shipping mode from shipping mode status signal received from BCM via CAN communication.

TIRE STATUS FR

[On/Off]

Displays [On/Off] condition of tire status.

TIRE STATUS FL

[On/Off]

Displays [On/Off] condition of tire status.

TIRE STATUS RR

[On/Off]

Displays [On/Off] condition of tire status.

TIRE STATUS RL

[On/Off]

Displays [On/Off] condition of tire status.

STRG SW INPUT

[SW1-SW12, NOT INPUT]

Status of steering switch.

STRG SW OUTPUT

[SW1-SW12, NOT OUTPUT]

Status of steering switch.

ITS SONAR SET OUTPUT

[NO SW ST, FEB Off, FEB On, LDW OFF, LDW ON, BSW OFF, BSW ON, P MV OFF, P MV ON, SONAR OFF, SONAR ON, P SEN OFF, P SEN ON, P SEN FRONT, P BUZ HIGH, P BUZ MED, P BUZ LOW, P RNG FAR, P RNG MED, P RNG NEAR]

Status of Driving Aids and Parking Aids set on the information display of the combination meter.

LANE IND

[On/Off]

Displays [On/Off] condition of LANE warning indicator message in the information display.

FCW IND

[On/Off]

Displays [On/Off] condition of FCW warning indicator message in the information display.

LDW IND

[On/Off]

Displays [On/Off] condition of LDW warning indicator message in the information display.

BCI

[On/Off]

Displays [On/Off] condition of BCI system in the information display.

BCI LEFT

[On/Off]

Displays [On/Off] condition of BCI left sensor in the information display.

BCI RIGHT

[On/Off]

Displays [On/Off] condition of BCI right sensor in the information display.

TARGET FRONT VEHICLE

[On/Off]

Status of vehicle ahead detection indicator judged from meter display signal received from ADAS control unit via CAN communication.

CRUISE READY IND

[On/Off]

Status of CRUISE indicator lamp detected from CRUISE indicator lamp signal is received from ECM via CAN communication.

SET LDW

[On/Off/Not support]

Status of LDW system setting.

SET BSI BRIGHTNESS

[On/Off]

Status of BSI indicator brightness.

SET LDP TIMING

[Not support]

SET BCI BRAKE RESUME

[Not support]

SET LDP

[On/Off/Not support]

Displays On/Off status of LDP system.

SET BSI

[On/Off/Not support]

Displays On/Off status of BSI system.

SET BSW

[On/Off/Not support]

Displays On/Off status of BSW system.

SET DCA TIMING

[Not support]

SET RMOD

[Not support]

SET BCI IGNITION STATUS

[On/Off]

Displays On/Off status of BCI ignition signal.

SET IBA

[On/Off/Not support]

Displays On/Off status of IBA system.

MSS INFO&WARN1

[On/Off]

Status of FEB and ICC system can not operate is displayed.

MSS INFO&WARN2

[On/Off]

Status of DCA, BSI and LDP system can not operate is displayed.

MSS INFO&WARN3

[On/Off]

Status of DCA, BSI and LDP system can not operate caused by high temperature is displayed.

MSS INFO&WARN4

[On/Off]

Status of DCA, BSI and LDP system can not operate caused by malfunction of a radar is displayed.

SIGNAL WARNING STATUS

[On/Off]

Displays current signal warning status.

TIRE PRESS FR

[kPa, kg/cm2 or Psi]

Displays air pressure of front right tire.

TIRE PRESS FL

[kPa, kg/cm2 or Psi]

Displays air pressure of front left tire.

TIRE PRESS RR

[kPa, kg/cm2 or Psi]

Displays air pressure of rear right tire.

TIRE PRESS RL

[kPa, kg/cm2 or Psi]

Displays air pressure of rear left tire.

BSW IND

[On/Off]

Displays [On/Off] condition of vehicle ahead detection indicator in the information display.

IBA IND

[On/Off]

Displays [On/Off] condition of IBA indicator in information display.

DCA IND

[On/Off]

Status of DCA switch indicator judged from meter display signal received from ICC sensor integrated unit with CAN communication line.

LDP IND

[On/Off]

Displays [Off, Short, Middle, Long] status of set distance indicator in the information display.

BSI IND

[On/Off]

Displays [On/Off} status of BCI indicator.

FR RADAR WARN

[On/Off]

Displays [On/Off] condition of front radar warning judged from front radar warning signal received from ADAS control unit via CAN communication.

BCI ON IND

[On/Off]

Displays [On/Off] condition of BCI ON indicator judged from meter display signal received from ADAS control unit via CAN communication.

BCI OFF IND

[On/Off]

Displays [On/Off] condition of BCI Off indicator judged from meter display signal received from ADAS control unit via CAN communication.

BCI WARNING IND

[On/Off]

Displays [On/Off] condition of BCI malfunction indicator judged from meter display signal received from ADAS control unit via CAN communication.

BCI HI TEMP WARN IND

[On/Off]

Displays [On/Off] condition of BCI not available indicator judged from meter display signal received from ADAS control unit via CAN communication.

FEB W/L

[On/Off]

Status of FEB indicator lamp judged from FEB warning lamp signal received from ADAS control unit with CAN communication line.

FEB WARN

[On/Off]

Status of FEB warning judged from meter display signal received from ADAS control unit with CAN communication line.