Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis)

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK PARKING BRAKE SWITCH CIRCUIT

Disconnect combination meter harness connector M24 and parking brake switch harness connector E52.

Check continuity between combination meter harness connector M24 terminal 12 and parking brake switch harness connector E52 terminal 1.

12 - 1

: Continuity should exist.

Check continuity between combination meter harness connector M24 terminal 12 and ground.

12 - Ground

: Continuity should not exist.

Is the inspection result normal?

YES

Inspection End.

Repair or replace harness or connectors.