Component Inspection
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK METER CONTROL SWITCH
- Turn ignition switch OFF.
- Disconnect meter control switch connector.
- Check meter control switch.
Meter control switch
Condition
Continuity
Terminals
1
2
When illumination control switch (-) is pressed
Yes
Other than the above
No
3
When trip reset switch is pressed
Yes
Other than the above
No
12
When illumination control switch (+) is pressed
Yes
Other than the above
No
Is the inspection result normal?
YES
Inspection End.
NO
Replace meter control switch. Refer to Removal and Installation .