Component Function Check

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

COMBINATION METER INPUT SIGNAL

Select METER/M&A on CONSULT.
Using FUEL METER of DATA MONITOR, compare the value of DATA MONITOR with fuel gauge pointer of combination meter.

Fuel gauge pointer	Fuel tank volume [L] (Approx.)
Full	70.6
3/4	54.1
1/2	36.4
1/4	20
Empty	0.0

Does the data monitor value approximately match the fuel gauge indication?

YES

Inspection End.

Replace combination meter. Refer to Removal and Installation .