Diagnosis Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK COMBINATION METER INPUT SIGNAL
- Start engine and select METER/M&A on CONSULT.
- Using SPEED METER on DATA MONITOR, compare the value of DATA MONITOR with speedometer pointer of combination meter. Speedometer and DATA MONITOR indications should be close.
Is the inspection result normal?
YES
Perform ABS actuator and electric unit (control unit) self-diagnosis. Refer to CONSULT Function (Type 1) or CONSULT Function (Type 2).
NO
Replace combination meter. Refer to Removal and Installation .