Diagnosis Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK AROUND VIDEO DISTRIBUTOR
Visually check around video distributor for a cause of high temperature.
Is the inspection result normal?
YES
GO TO 2.
NO
Replace video distributor. Refer to Removal and Installation .
- PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT
- Turn ignition switch ON.
- Turn ignition switch OFF and wait at least 30 seconds.
- Turn ignition switch ON and wait at least 30 seconds or more.
- Select "Self Diagnostic Result" mode of "MULTI AV" using CONSULT.
- Check DTC.
Is DTC U12C6 detected?
YES
Replace video distributor. Refer to Removal and Installation .
NO
Inspection End.