Component Function Check
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Before performing the diagnosis, check that the following is normal:
- Battery saver output/power supply
- Front step lamp bulbs
- Foot lamp bulbs
- CHECK STEP LAMP OPERATION
CONSULT
- Turn ignition switch ON.
- Select "STEP LAMP TEST" in "Active Test" mode of "BCM".
- While operating the test items, check that front step lamp and foot lamp turns ON/OFF.
On
: Front step lamp and foot lamp ON
Off
: Front step lamp and foot lamp OFF
Is the inspection result normal?
YES
Step lamp circuit is normal.
NO
Refer to Diagnosis Procedure .