LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 586 (Front Suspension) >> Removal And Installation >> Steering Knuckle >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front wheel hub and bearing. Refer to Removal and Installation .
  2. Separate outer socket from steering knuckle. Refer to Exploded View .
  3. Remove the steering knuckle lower pinch bolt and separate transverse link from the steering knuckle.
  4. Remove steering knuckle to strut bolts and steering knuckle. Refer to Exploded View .
scientia non olet · About LEMON Manuals