Removal and Installation: Removal
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- Remove wheels and tires using power tool. Refer to Adjustment .
- Loosen the flare nut with a flare nut wrench and separate the brake tube from the hose.CAUTION:
- Do not scratch the flare nut and the brake pipe.
- All brake hoses and pipes must be free from excessive bending, twisting and pulling.
- Remove the union bolt (A) and the brake hose from the brake caliper. Remove and discard the copper sealing washers (1).CAUTION: Do not reuse copper sealing washers.
- Remove the lock plate and remove the brake hose.