LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 583 (Rear Final Drive) >> Removal And Installation >> Side Oil Seal >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear drive shaft (LH) or (RH) as necessary. Refer to Removal and Installation .
  2. Remove side oil seal (1), using suitable tool.
    GNSALDIA0284Z-284Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Be careful not to damage gear carrier and side cover.

    SYMBOL

    : Front