LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 579 (Engine Control System (3 Of 3)) >> Removal And Installation >> Electric Intake Valve Timing Control Module >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front air duct. Refer to REMOVAL AND INSTALLATION .
  2. Remove battery. Refer to Removal and Installation .
  3. Disconnect harness connectors from electric intake valve timing control module.
    CAUTION: Never touch harness connector pins with bare hands.
  4. Remove electric intake valve timing control module.
scientia non olet · About LEMON Manuals