LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 578 (Starting System) >> Removal And Installation >> Starter Motor >> Inspection >> Pinion Clutch

Pinion Clutch

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check pinion gear teeth.
    G08199716Courtesy of NISSAN NORTH AMERICA, INC.
    • Replace starter motor if teeth are worn or damaged. (Also check condition of ring gear teeth).
  2. Check to see if pinion locks in one direction and rotates smoothly in the opposite direction.
    • Replace starter motor if pinion is locked, rotates in both directions or unusual resistance is evident.