Removal and Installation: Installation

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION:

Do not reuse O-ring.

Perform camera image calibration (with around view monitor). Refer to Description (if equipped).

After installation, refill engine coolant and check for leaks. Refer to Changing Engine Coolant and System Inspection .
CAUTION: Do not spill engine coolant in engine compartment. Use a shop cloth to absorb engine coolant.