LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 569 (Automatic Transmission (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Main Power Supply And Ground Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK TCM POWER CIRCUIT (PART 1) 
    1. Turn ignition switch OFF.
    2. Disconnect TCM connector.
    3. Check voltage between TCM harness connector terminals and ground.

      +

      -

      Voltage

      TCM

      Connector

      Terminal

      F25

      45

      Ground

      10 - 16 V

      46

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    GO TO 4.

  2. CHECK TCM POWER CIRCUIT (PART 2) 

    Check voltage between TCM harness connector terminals and ground.

    +

    -

    Condition

    Voltage

    TCM

    Connector

    Terminal

    F25

    47

    Ground

    Ignition switch ON

    10 - 16 V

    Ignition switch OFF

    Approx. 0 V

    48

    Ignition switch ON

    10 - 16 V

    Ignition switch OFF

    Approx. 0 V

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    GO TO 5.

  3. CHECK TCM GROUND CIRCUIT 

    Check continuity between TCM harness connector terminals and ground.

    TCM

    --

    Continuity

    Connector

    Terminal

    F25

    41

    Ground

    Existed

    42

    Is the inspection result normal?

    YES

    Check intermittent incident. Refer to Intermittent Incident .

    NO

    Repair or replace malfunctioning parts.

  4. DETECT MALFUNCTION ITEMS (PART 1) 

    Check the following items:

    • Open or short circuit in harness between battery positive terminal and fuse block (J/B). Refer to Wiring Diagram - BATTERY POWER SUPPLY - .
    • Open or short circuit in harness between fuse block (J/B) connector terminal 2N and TCM harness connector terminal 45, and 46.
    • 10A fuse [No. 25, located in the fuse block (J/B)]. Refer to Terminal Arrangement .

    Is the inspection result normal?

    YES

    Check intermittent incident. Refer to Intermittent Incident .

    NO

    Repair or replace malfunctioning parts.

  5. DETECT MALFUNCTIONING ITEMS (PART 2) 

    Check the following items:

    Is the check result normal?

    YES

    Check intermittent incident. Refer to Intermittent Incident .

    NO

    Repair or replace malfunctioning parts.